A webáruház használatával jóváhagyja a cookie-k használatát, a cookie-kkal kapcsolatos irányelv értelmében.
Menü

Emulex 8Gb Fibre Channel Single-port HBA ( 42D0485 )

Ár:
131.990 Ft (103.929 Ft + ÁFA)
Gyártó cikkszám: 42D0485
Rubinetti cikkszám: RUB_42D0485
Elérhetőség: Raktáron azonnal átvehető
Várható szállítás: 2025. április 03.
Átlagos értékelés: Nem értékelt
Gyártó: LENOVO

Leírás és Paraméterek

Főbb tulajdonságok:

Befogadó csatlakozó PCIe  
Output interface Fibre  
Portok száma 1
Kapcsolódási technológia Wired  
Teljes kétoldalú Igen
Macintosh kompatibilitás Nem
Üzemi hőmérséklettartomány (T-T) 0 - 55°C
Tárolási hőmérséklettartomány (T-T) -40 - 70°C
Relatív üzemi páratartalom-tartomány 5 - 95%

 

Leírás eredeti nyelven: US

 

Industry Standards

  • Current ANSI/IETF Standards: FC-PI-4; FC-PI-5; FC-FS-2 with amendment 1; FC-AL-2 with amendments 1 and 2; FC-LS-2; FC-GS-6; FC-DA; FC-SP-2; FCP-4; FC-MJS; FC-SB-4; FC-SP; SPC-4; SBC-3; SSC-3; RFC4338
  • Legacy ANSI/IETF standards: FC-PH; FC-PH-2; FC-PH-3; FC-PI; FC-PI-2; FC-FS; FC-AL; FC-GS-2/3/4/5; FCP; FCP-2; FC-SB-2; FC-FLA; FC-HBA; FC-PLDA; FC-TAPE; FC-MI; SPC-3; SBC-2; SSC-2; RFC2625
  • PCIe base spec 2.0
  • PCIe card electromechanical spec 2.0
  • Fibre Channel class 2 and 3
  • PHP hot plug-hot swap

Architecture

  • Single-channel (IBM 81Y1655) or dual-channel (IBM 81Y1662)
  • Supports 16GFC, 8Gb FC and 4Gb FC link speeds, automatically negotiated
  • Supports up to 2 FC ports at 16Gb FC max (dual port model)
  • Integrated data buffer and code space memory

Comprehensive OS Support

  • Windows
  • Linux
  • Solaris
  • VMware ESX/ESXi
  • Additional support is available from OEMs and partners

Hardware Environments

  • PowerPC, SPARC, x86, x64 and Intel Itanium 64-bit processor family

Optical

  • Data rates: 14.025 Gb/s (1600Mb/s); 8.5 Gb/s (800Mb/s); 4.25 Gb/s (400 Mb/s) (auto-detected)
  • Optics: Short wave lasers with LC type connector
  • Cable: Operating at 16Gb
    • 15m at 16Gb on 62.5/125 μm OM1 MMF
    • 35m at 16Gb on 50/125 μm OM2 MMF
    • 100m at 16Gb on 50/125 μm OM3 MMF
    • 125m at 16Gb on 50/125 μm OM4 MMF

Physical Dimensions

  • Short, low profile MD2 form factor card
  • 167.64mm x 68.91mm (6.60” x 2.71”)
  • Standard bracket (low profile available)

Power & Environmental Requirements

  • Power supply 1.8V, 1.2V, 0.9V
    • Volts: +3.3, +12
    • Operating temperature: 0° to 55° C (32° to 131° F)
    • Storage temperature: -40° to 70° C (-40° to 158° F)
    • Relative humidity: 5% to 95% non-condensing
    • 23° C wet bulb

Agency and Safety Approvals

Class 1 Laser Product per DHHS 21CFR (J) and EN60825-1*

  • UL recognized to UL 60950-1 2nd edition
  • cUR recognized to CSA22.2, No. 60950-1-07
  • TUV Bauart-certified to EN60950-1:2006 +A11+A1+A12
  • FCC Part 15, Class A
  • ICES-003:2012, Class A
  • EMC Directive 2004/108/EC (CE Mark)
    • EN55022:2010, Class A
    • EN55024:2010
  • Australian EMC Framework (C-Tick Mark)
    • AS/NZS CISPR:2009 +A1, Class A
  • VCCI Class A
  • BSMI Class A
    • CNS13438:2006 (complete)
  • MSIP (formally KCC/MIC), Class A
  • EU RoHS Compliant (Directive 2011/65/EU)
  • China RoHS Compliant

Added Features

Performance Features

  • Doubling the maximum Fibre Channel link rate from 8Gb to 16Gb and enhanced virtualization capabilities, help support IT “green” initiatives.
  • Frame-level Multiplexing and out-of-order frame reassembly increases link efficiency and maximizes HBA performance.

Data Protection Features

  • End-to-end data protection with hardware parity, CRC, ECC and other advanced error checking and correcting algorithms ensure data is safe from corruption.
  • Enhanced silent data corruption protection provided by T10-Protection Information (T10‑PI). T10-PI provides additional protection against corruption in Oracle Unbreakable Linux environments.

Deployment and Management Features

  • Universal boot capability allows the appropriate boot environment to be automatically selected for any given hardware.
  • Boot from SAN capability reduces system management costs and increases uptime.
  • Detailed, real-time event logging and tracing enables quick diagnosis of SAN problems.
  • Beaconing feature flashes the HBA LEDs, simplifying their identification within server racks.
  • Environmental monitoring feature helps optimize SAN availability.

Vélemények

Erről a termékről még nem érkezett vélemény.
Írja meg véleményét!

Keresés